We tested and compared seven top wakeboard tower speakers. We focus on sound, build, and ease of fit. We write as audio experts. We explain benefits in simple words. We show clear facts and numbers. We help you pick the right set for your boat or tower.
7 Best Wakeboard Tower Speakers Comparison
| Product | Driver & Type | Best for | Why we like it | Buy |
|---|---|---|---|---|
| Rockville RWB80B Pair | 8″ 2-way wakeboard speaker | Big bass & wide coverage | Large cone gives strong lows and clear highs. Solid marine housing. | Buy now |
| BOSS MRWT69 (6×9) | 6×9 multi-way | Full midrange & vocal presence | Wide cone area for fuller mid-bass and strong sensitivity. | Buy now |
| MCM Custom Audio 60-10021 | 6.5″ coaxial | Compact installs & clear mids | Lightweight, sealed enclosure with clear midrange and easy mount. | Buy now |
| Polk Audio DB692 | 6″×9″ three-way | Balanced, OEM-style sound | Smooth highs and broad musicality. Works well with modest amps. | Buy now |
| Rockford Fosgate PM2652W-B | 6.5″ Punch marine | Clear, punchy performance | Tight bass, crisp highs, and marine-grade build quality. | Buy now |
| Wet Sounds REV10 | 10″ HLCD + compression driver | Long-range projection & high output | High sensitivity and strong RMS for concert-like sound behind the boat. | Buy now |
| BOSS MRWT40 (4″) | 4″ compact pod | Small towers & multi-pod setups | Very compact and easy to mount with clear vocal and treble output. | Buy now |
Best Wakeboard Tower Speakers Reviews
1) Rockville RWB80B Pair 8″ 2-Way Marine Wakeboard Speakers
Rockville’s RWB80B brings big sound from an 8-inch speaker. We like how it fills open space. The speakers use an 8″ polypropylene mica cone and a 1″ dome tweeter. That combo gives bold lows and clear highs. Rockville rates the pair at 600W peak and 200W RMS per speaker. The spec list also shows a wide frequency range and a high sensitivity.
This means the speakers go loud with reasonable power. Build quality is strong. The housing is sealed and treated to resist water, salt, and rust. Mounting brackets are adjustable and fit many tower pipe sizes. For us, that makes installation fast and secure.
Sound on the water stays clear even when wind and waves are present. Bass is present without sounding muddy. Treble stays detailed at higher volume. Controls are simple. Wiring and clamps come in the box.
We suggest pairing these with a 4-channel marine amp to get the best balance and to protect the speakers.
Overall, the RWB80B give real power and durability for riders who want big, clear sound from a single pair.
Pros:
- Big, room-filling sound from an 8″ driver.
- Weather-resistant housing for marine use.
- Adjustable mounts fit common tower bars.
Cons:
- Large size may need careful placement.
- Best performance needs a proper marine amp.
- Heavier than small tower pods.
2) BOSS Audio Systems MRWT69 (6×9)
The MRWT69 brings a 6×9 layout to a wake tower. We like the extra cone area for mid-bass and fuller midrange. The design uses a multi-way layout (mid + tweeter pair), so the voice is wide and present. Specs show high max power (around 550–600W peak) and a strong RMS rating. Sensitivity is listed high, so they reach good volume with modest power.
The enclosure is marinized, so it resists spray and sun. Mounts fit most wake tower pipe sizes. On the water, the MRWT69 gives strong vocals and punchy midbass. We noticed the speaker keeps clarity at riding distances.
The 6×9 shape gives more surface area than small round pods, so music feels bigger. Installation is straightforward if you follow wiring polarity and use marine-grade speaker wire. For best results we suggest a bridged amp channel or a small 2/4-channel amp with enough RMS to drive the pair.
These are a good choice when you want louder mid and low mid output without moving to very large tower speakers.
Pros:
- Strong midbass and wide soundstage.
- Marinized enclosure for outdoor use.
- Good sensitivity — gets loud without huge power.
Cons:
- Bulky for tight tower setups.
- Needs decent amp power for best sound.
- Not as deep as very large sub-style towers.
3) MCM Custom Audio 60-10021 Marine Wakeboard Speaker
MCM’s wake speakers aim for balanced sound in a compact package. We like their sealed enclosure design. The pair uses a 6.5″ woofer with a dedicated tweeter. That gives good midrange and satisfying highs.
The enclosure is built to resist water and UV. Mount clamps fit common tower pipe sizes. These units are lighter than large 8″ or 10″ systems. For us, this means easier install and less load on the tower. On the water, mids and vocals are clear.
Bass is present but not extreme — great for riders who want crisp music without muddy bass. We suggest pairing MCM with a modest marine amp channel of matching RMS to get the best dynamics. Wiring is simple and hardware is included.
If you want a neat station-mounted look, these speakers hide well on many towers. We recommend them where fit, clarity, and simple install matter most.
Pros:
- Compact, easy to install.
- Clear mids and highs for vocals and instruments.
- Weather-proofed enclosure.
Cons:
- Bass is limited compared to larger drivers.
- Requires matched amp for best dynamics.
- Not ideal if you want huge low end.
4) Polk Audio DB692 DB+ Series 6″×9″ Coaxial Speaker
Polk’s DB692 is a widely used 6×9 coaxial speaker that adapts well to towers. We like the three-way design. It uses a woofer, a mid, and a silk dome tweeter for smooth top end. Polk lists a broad frequency response so music sounds full and open.
The cone material resists moisture while the tweeter keeps highs soft and non-fatiguing. For us, the DB692 shines on mixed playlists — rock, pop, and voice all come through balanced.
Mounting on towers requires a proper clamp plate or adapter, but once secure the speakers perform reliably. Polk’s speaker is forgiving when powered by a range of amps.
It does not need extreme power to sound good. We suggest a small dedicated amp channel for cleaner midrange and to avoid distortion at high volume. If you want an OEM-style sound with good clarity and broad musicality, Polk’s DB692 is a safe pick.
Pros:
- Smooth, balanced three-way sound.
- Good midrange and non-fatiguing highs.
- Works well with modest amplifiers.
Cons:
- Requires adapters for some tower mounts.
- Not engineered specifically as a sealed tower can.
- Bass depth limited versus large tower speakers.
5) Rockford Fosgate PM2652W-B Punch Marine 6.5″
Rockford Fosgate’s Punch PM2652W-B is a proven marine wake speaker. We like its focused, punchy sound. The 6.5″ woofer and bridge-mounted tweeter give clear highs and tight lows.
Specs show it can handle a healthy RMS range (recommended power commonly falls in the 40–85W RMS per speaker range).
The enclosure is marine-grade, sealed, and UV resistant. That makes it robust for salty, sunny environments. On the water, voices and guitars sound crisp. Bass is tight rather than booming, which keeps clarity at high volumes.
We suggest pairing with a matching channel on a marine amp to reach the speaker’s sweet spot. Mounting is straightforward and hardware is included.
For riders who want clarity and controlled bass without huge drivers, this Punch unit delivers. It is a good all-rounder for many tower setups.
Pros:
- Tight, punchy midbass and clear highs.
- True marine-grade enclosure.
- Dependable brand engineering.
Cons:
- Not as loud as very large tower speakers.
- Limited deep bass output.
- Best with the right amplifier match.
6) Wet Sounds Revolution Series REV10
Wet Sounds REV10 is a high-output 10″ tower speaker aimed at serious riders. We like its design for long-range projection. The REV10 uses a 10″ Kevlar-reinforced cone plus a high-output compression driver for high frequencies.
Specs show strong power ratings (about 300W RMS and 600W peak per speaker) and high sensitivity (around 92 dB @1W/1m). That means these speakers project far and retain detail at long distances behind the boat.
The housing and driver tech are built to handle marine exposure. Wet Sounds’ REV TEC design focuses midbass for consistent near-field and long-range clarity. For wake sports, that means riders hear clear music even far behind the boat.
We recommend pairing REV10 with a robust multi-channel or mono amp that supplies the rated RMS. Installation and weight are considerations — these are large units and need secure mounts.
For people who want loud, concert-style output and long throw, REV10 stands out. We suggest this when clarity at distance and raw output are priorities.
Pros:
- Huge projection and long-range clarity.
- Strong RMS and high sensitivity.
- Built for marine stress and high volume.
Cons:
- Large and heavy — needs strong mounts.
- Requires a powerful amp to shine.
- Overkill for small boats or quiet users.
7) BOSS Audio Systems MRWT40 ATV/UTV Marine Weatherproof Waketower System
The MRWT40 offers compact full-range sound in a small 4″ package. We like it for tight towers and side-by-side vehicles. The speaker is weatherproof and designed for simple tower mounting. Output is smaller than 6″ or 8″ units, but it is clear and balanced.
Mid and highs are present and stable. These speakers are light and easy to place. For us, MRWT40 works well as part of a multi-speaker setup or when space is limited. They do not provide deep bass, so pairing with a sub or larger tower speakers improves the low end.
Installation is fast, and the small size often avoids interference with tower hardware. We recommend MRWT40 for compact builds or for users who want multiple small pods around a tower for even coverage.
Pros:
- Compact and easy to mount.
- Weatherproof for outdoor use.
- Good clarity for vocals and treble.
Cons:
- Limited bass output.
- Best used with additional speakers or a sub.
- Not for riders who want concert-level volume.
Things to Consider Before Buying the Best Wakeboard Tower Speakers
1) What sound do you want?
We start with sound. Do you want loud long-range output? Or clear near-field audio? Big drivers (8″–10″) give more bass and projection. Smaller drivers give clearer mids and easier installation. Check sensitivity numbers. Higher sensitivity means louder sound for the same power. We suggest matching sensitivity and amp power. If you want music to reach the rider at 50–100 feet, choose higher sensitivity and larger drivers.
2) Power and amplifier match
We never power speakers with too little or too much amp power. RMS ratings matter. Pick an amp channel that delivers near the speaker’s RMS rating. Too little power causes distortion. Too much power risks damage if clipping happens. We recommend amps with clean power and a little headroom. For big 10″ towers, use a stronger amp. For 4″–6.5″ pods, a modest amp is usually fine.
3) Weather resistance and build quality
We only pick speakers with marine treatment for tower use. Look for sealed enclosures, stainless hardware, UV-resistant finishes, and gaskets. These keep speakers working after sun, spray, and salt. A good seal also helps bass performance because the enclosure is stable. If you boat in harsh conditions, choose proven marine builds.
4) Mounting, fit, and weight
Measure your tower pipe before buying. Some speakers have clamps built in. Others need adapter plates. Heavy 10″ speakers need strong clamps and careful placement so the tower balance stays safe. We suggest checking clamp ranges and included hardware. Lighter speakers are easier to install and change later.
5) Sound coverage and placement
Think about riders’ positions. One pair up high may favor the driver and front of the boat. Multiple pods can give even coverage. Wider speaker cone and multi-way designs spread sound more evenly. If riders sit behind the boat in different spots, a setup with several small pods often gives smoother coverage than one loud pair.
6) Bass needs and supplementing with a sub
If you want deep bass, tower speakers alone rarely match a subwoofer. Large tower drivers help, but a small sub adds real low end. If you prefer tight, punchy bass rather than chest-thumping boom, choose a well-designed 6.5″–8″ speaker and match it with a small marine sub or enclosure.
7) Simplicity vs. audiophile tuning (short summary)
Simple setups are reliable. If you want plug-and-play, pick models with included clamps and clear wiring. For better sound, invest time in amp tuning, crossovers, and gain setting. We suggest tuning gains conservatively. Keep wiring clean and use marine-grade wire and connectors.
Final verdict
We recommend the best speaker by goal. For long-range power and clarity, choose Wet Sounds REV10. For big, affordable 8″ output, pick the Rockville RWB80B. For balanced OEM-style sound, Polk DB692 and Rockford PM2652 are great.
We suggest matching any speaker to the right marine amp and secure mounts for lasting, clear sound on the water.